Technical Support – Full or Part Time. Salary £13,500 t0 £20,000 depending on qualifications/experience.

Due to expansion we have a vacancy for an individual to provide technical support to our sales team and customers together with detailed quotations and assistance with marketing campaigns. This is an exciting opportunity for someone with excellent communication and computer skills, together with a Science based degree or A-levels and/or experience working within a laboratory/scientific environment.

Full induction and training will be provided.

We are a flexible company and would consider applicants looking for a part time position.

Applications with full CV to:

Email: mb@sciquip.co.uk
or Writtern: Matt Brooksbank, SciQuip Ltd, 2&3 Merrington Hall Farm, Merrington, Shrewsbury, SY4 3QJ

Closing date for applications: 11th March 2012

No agencies please.

1. ALWAYS ensure that you load the opposite inserts/rotors with the same accessories and fill evenly to avoid any imbalance. And then ensure that the rotor is secured properly using the correct rotor wrench.
2. Carefully remove all liquids, and in particular all solvents, acids and alkaline solutions from the rotor chamber. Use a cloth to avoid any damage to the motor bearings.
3. If any parts of the centrifuge have come into contact with any liquids that may cause corrosion, make sure that they are immediately rinsed off. Turn fixed angle rotors upside down to allow them to dry thoroughly.
4. We recommend a weekly clean of the accessories outside the centrifuge. Remove, clean and properly dry any rubber cushions. To clean the centrifuge and the accessories, we suggest soap water or a mild cleaning agent with a pH value of between 6 and 8.
5. Grease the load-bearing bolts of swing-out rotors and the buckets after each cleaning.
6. Grease the motor shaft lightly after cleaning.
7. Grease the rotor tie-down screw after cleaning.
8. Apply slushing oil to aluminium rotors and buckets and to the lid seal. Do this at least once a week to prevent corrosion. Only do this once you have cleaned the accessories and they are completely dry.
9. Check all accessories monthly for cracks, pressure marks, signs of corrosion and any visible damage to the surface.
10. For your own safety, do not delay in replacing any damaged components, if you are unsure contact our service department for advice on 01939 291200.

Sigma Centrifuges at SciQuip

At SciQuip, our Sigma Centrifuges are suitable for all laboratory, clinical, research and industrial applications and are supported by our own factory trained engineers.

For a free Preventative Maintenance Short Guide please email service@sciquip.co.uk or call 01939 291200.

If you would like to find out more about our range of Sigma Centrifuges or speak to someone regarding your specific requirements call 01939 291200 or email info@sciquip.co.uk