ISO9001:2015 & ISO14001:2015
LEEC Classic Incubator Range
The new LEEC Classic Range of incubators have fully sealed chambers manufactured from polished stainless steel with rounded corners for easy cleaning. The outer cabinet is manufactured from stainless steel, and has a tough powder coat paint finish. This gives the incubator exceptional corrosion resistance. An inner glass viewing door closes positively onto a silicone gasket and allows a clear view of the chamber contents without disturbing the internal atmosphere. The outer door has a magnetic gasket providing a good seal. A rear access port allows temperature monitoring probes to be inserted safely into the incubator chamber. Contact us for prices and availability on the LEEC Classic Incubator Range.
- All stainless steel construction
- Fully sealed chamber
- Fan assisted air circulation
- Accurate temperature control
- Energy efficient
- Simple to use
- Fast recovery time
- Radius corners
- Digital control
New profiled resistive wire heating elements and high performance insulation ensure optimum temperature control. All models have gentle fan assisted air circulation. This ensures even temperature distribution throughout the chamber. Fast temperature recovery keeps heat loss to a minimum after door opening.
The latest in microprocessor temperature controller technology gives this incubator range excellent temperature stability to within 0.1°C. Fuzzy Logic and Auto Tune features allow the controller to adapt to each chamber size, optimising their performance and accuracy. The controller is simple to use, with target and actual temperatures being displayed in real time on a two-colour digital display.
Over and under temperature alarm thresholds can be programmed into the controller. An independent safety cut out disconnects the heating elements should an over temperature condition occur. The controller can be password protected too, stopping any unauthorised adjustments to the Set Point and alarm thresholds.
Warranty LEEC Classic Incubators are covered by a 1 year warranty.
|External (Dimensions H x W x D mm)||582 x 684 x 620||790 x 68 4 x 620||1417 x 684 x 620|
|Internal (Dimensions H x W x D mm)||365 x 550 x 500||573 x 550 x 500||1200 x 550 x 500|
|Chamber Capacity (litres)||100||157||330|
|Power Rating (watts)||240 (maximum)||280 (maximum)||440 (maximum)|
|Temperature Range||At least 5°C above ambient to +60 °C|
|Temperature Control||Typically ± 0.1°C at 37.0°C|
|Temperature Variation||Typically better than ± 0.2°C at 37.0°C|
|Temperature Recovery (approx.)||2 minutes||3 minutes||4 minutes|
Write a review of LEEC Classic Incubator Range
Get in touch with us on 01939 234222
Need further assistance or can't find what you're looking for? Please complete all details of your enquiry and we will get back to you shortly.