SciQuip Benchtop pH/ORP/Conductivity/TDS/ Salinity/°C/°F Meter

Buy Now

pH Mode:

  • High accuracy benchtop multiparameter water quality meter is equipped with a large backlit LCD display.
  • 1 to 5 points push-button calibration with auto-buffer recognition.
  • Selectable pH buffer standards (USA/NIST/DIN) or using the custom calibration solutions.
  • Automatic electrode slope display helps user decide whether to replace sensor.

ORP Mode:

  • Single point offset calibration allows adjusting the displayed value to a known standard.
  • Relative and absolute millivolt measurement modes provide accurate ORP readings.

Conductivity/TDS/Salinity/Resistivity Mode:

  • 1 to 5 points push-button calibration with automatic calibration solution recognition.
  • Selectable cell constants (0.1/1/10), normalization temperatures (20/25°C), TDS conversion factors, seawater and practical salinity measurement modes.
  • Linear or pure water compensation improves measurement accuracy of meter.

Other Features:

  • Automatic Temperature Compensation provides accurate reading over the entire range.
  • Calibration Due Reminder prompts user to calibrate the meter regularly.
  • Stability indicator automatically shows current measurement status.
  • Auto-Hold function freezes stable measured value for easy viewing and recording.
  • Manual temperature calibration corrects temperature deviation.
  • Selectable temperature unit (°C or °F) meets different application requirements.
  • Automatic electrode diagnosis shows zero point offset and slope of the electrode.
  • Help message as a operational guide that helps you quickly begin using the meter.
  • System menu allows setting the 12 parameters, including the calibration points, resolutions, stability conditions, measurement units, etc.
  • Reset feature automatically resumes all parameters back to factory default options.
  • Expanded memory stores and recalls up to 500 readings.
  • Stored data can be transferred into computer by USB communication interface.
Technical Specification

pH

   Range -2.000~20.000pH
   Accuracy ±0.002pH
   Resolution 0.1, 0.01, 0.001pH
   Calibration Points 1 to 5 points, USA, NIST, DIN Standards

mV

   Range -1999.9~1999.9mV
   Accuracy ±0.2mV
   Measurement Mode Relative or Absolute mV
   Resolution 0.1, 1mV
   Calibration Points 1 point (Only for Relative mV mode)

Conductivity

   Range 0~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm
   Accuracy ±0.5% F.S
   Resolution 0.001, 0.01, 0.1, 1
   Calibration Points 1 to 5 points
   Calibration Solutions 10µS/cm, 84µS/cm,1413µS/cm,12.88mS/cm,111.8mS/cm
   Temperature Compensation 0~100°C, 32~212°F, Manual or Automatic
   Temperature Coefficient 0.0~10.0%/°C
   Compensation Modes Linear or Pure Water
   Cell Constant K=0.1, 1, 10
   Normalization Temperature 20 or 25°C

TDS

   Range 0-10.00, 100.0, 1000ppm, 10.00, 100.0ppt (Max. 200ppt)
   Accuracy ±1% F.S
   Resolution  0.01, 0.1, 1
   TDS Factor 0.1~1.0 (Default 0.5)

Salinity

   Range 0.0 – 80.00ppt, 0.00 – 42.00psu
   Accuracy ±1% F.S
   Resolution  0.01
   Measurement Modes Seawater or Practical Salinity

Resistivity

   Range 0.0 – 20.00MΩ
   Accuracy ±1% F.S
   Resolution 0.01, 0.1, 1

Temperature

   Range 0~105°C, 32~221°F
   Accuracy ±0.5°C, ±0.9°F
   Resolution 0.1°C
   Calibration Points 1 point
   Calibration Range Measured value ±10°C

General Spec

   Hold Function Manual or Auto Endpoint
   Stability Conditions Low or High
   Temperature Compensation  0-100°C, 32-212°F, Manual or Automatic
   Calibration Due 0 to 31 days or off
   Power Off Manual or Automatic (10, 20, 30 minutes)
   Reset Function Yes
   Memory Stores up to 500 data sets
   Output USB Communication Interface
   Connector BNC, 6-pin Mini Plug
   Display LCD
   Power Requirements DC5V, using AC adapters, 220VAC/50Hz
   Unit Dimensions (LxWxH) 210 x 188 x 60mm
   Packaged Dimensions (LxWxH) 300 x 240 x 170mm
   Weight 1.7kg
Write Your Own Review
You're reviewing:SciQuip Benchtop pH/ORP/Conductivity/TDS/ Salinity/°C/°F Meter
BUYING OPTIONS

Please swipe right and left to horizontal scroll the buying options.

Product Code Description List Price Offer Price
SQ-7076 SciQuip Benchtop pH/ORP/Conductivity/TDS/Salinity/°C/°F Meter including: P11 pH Electrode, K10 Conductivity Cell, Temperature Probe, pH Buffer Pouches (pH4.01/7.00/10.01), calibration solutions (146uS/cm, 1413uS/cm, 12.88mS/cm) and Power Adapter
£1,669.00
£910.00
ADD
Get in touch with us on 01939 234222

Need further assistance or can't find what you're looking for? Please complete all details of your enquiry and we will get back to you shortly.

  • I would like to receive updates about products & services, promotions,special offers, news & events from SciQuip Ltd.

Certified to ISO9001 & ISO14001

MORE

more cta
SciQuip Supports
more cta
Microscopes
From £150
more cta
TITAN Pipette Filler
Special Offer £115
more cta
SciQuip Vortex Mixers
From £84

If you're unable to find the scientific or medical laboratory equipment supplies you're looking for, please do not hesitate to contact SciQuip Technical Sales Support on 01939 234222 or by email at info@sciquip.co.uk