Sigma 4-16S Centrifuge

Buy Now
  • Universal table top centrifuge; speed range up to 13.500rpm
  • Control unit Spincontrol Comfort or Professional
  • Various angle and swing-out rotors available
  • Lid can easily be opened due pneumatic swing support
  • Maximum capacity of 4 x 500 ml down to microtubes with different adapters in the same bucket
  • Maintenance-free induction drive motor. A Microcontroller controls speed, time, temperature and gravitational field
  • Motorized lid lock
  • Suitable for low sppeds e.g. for cell sedimentation , accuracy +/- 1 rpm
  • Magnetic rotor identification prevents the rotor from overspeeding
  • Stainless steel bowl
  • Imbalance switch
  • No need to open casing for emergency lid lock release
  • Produced according to national and international safety regulations (e.g. IEC 1010)
  • Calibration certificate avaliable at an additional cost - please enquire for a quote
Technical Specification

 

Power supply

 220-240 V, 50/60 Hz
208 V, 60 Hz
120 V, 60 Hz
100 V, 50/60 Hz

 Power consumption [W]

 1.680

 Max. capacity [ml]

 4 x 500

 Max. speed [rpm]

 13.500

 Min. speed [rpm]

 100

 Interference suppression

 EN 61326

 Height x Width x Depth [mm]

 489 x 496 x 650

 Height with open lid [mm]

 940

 Weight without rotor [kg]

 82

 Kinetic energy max. [Nm]

 50.486

 Noise level at max. speed (approx.)

Rotor 12130 at 13500 rpm – Rotor 11150 at 4500 rpm

 73 dB (A)73 dB (A)

 Max. acceleration
- Rotor 12130 [sec] – Rotor 12256 [sec]

 2978

 Max. deceleration
- Rotor 12130 [sec] – Rotor 12256 [sec]

 28108

 Temperatur setting range

 -; + 70°C*

 Min. rotor temperature
- Rotor 11150 at 5.100 rpm [°C]
- Rotor 12256 at 9000 rpm [°C]

 –

 

Rotors & Accessories for the SIGMA 4-16 centrifuges

ORDER NO.

DESCRIPTION

MAX.RPM

MAX.RCF

 11118

 Swing-out rotor for microtiter plates, incl. 1 set carriers no. 13218,

plate holder no. 17978

 5.700 1/min

 5.013 x g

 11150

 Swing-out rotor, 4 place, e.g. for buckets no. 13215, 13220

 4.500 1/min

 4.120 x g

 11156

 Swing-out rotor, 6 place, e.g. for buckets no. 13127

 4.500 1/min

 4.324 x g

 11234

 Swing-out cytology rotor complete, rotor no. 11235, 2 sets buckets no. 13224,

4 inserts no. 15223

 3.000 1/min

 1.137 x g

 12130

 Angle rotor 30 x 1.5/2.2 ml, incl. hermetic aluminium lid

 13.500 1/min

 20.376 x g

 12165

 Angle rotor 6 x 85 ml, incl. hermetic aluminium lid

 12.500 1/min

 17.119 x g

 12166

 Angle rotor 8 x 50 ml, incl. hermetic aluminium lid

 12.500 1/min

 16.770 x g

 12168

 Angle rotor 20 x 10 ml, incl. hermetic aluminium lid

 12.500 1/min

 17.119 x g

 12169

 Angle rotor for 8 x 50 ml culture, incl. hermetic aluminium lid

 12.500 1/min

 18.168 x g

 12170

 Angle rotor for 12 x 15 ml culture, incl. hermetic aluminium lid

 12.500 1/min

 17.469 x g

 12172

 Angle rotor 12 x 30 ml, incl. hermetic aluminium lid

 12.500 1/min

 19.216 x g

 12174

 Angle rotor for 24 x 15 ml culture, 2 lines with same RCF-value,

incl. hermetic aluminium lid

 10.500 1/min

 15.531 x g

 12200

 Angle rotor 100 x 1.5/2.2 ml, incl. hermetic aluminium lid

 9.000 1/min

 14.761 x g

 12256

 Angle rotor 6 x 250 ml, sealable with hermetic aluminium lid

 8.000 1/min

 10.375 x g

Accessories For Sigma 4-16 Centrifuges

ORDER.NO.

DESCRIPTION

SUITABLE FOR:

13421

 Bucket for microtiter- and deepwellplates, max. height of plates 60 mm, 1 set = 4pcs.

 11650

 13450

 Round bucket, for the round carrier system Ø 100, for 650 ml tube, max. tubelength 140 mm, 1 set = 2 pcs.

 11650

 13215

 Rectangular bucket, sealable with cap no. 17112, max. tube length 115 mm, 1 set = 2 pcs.

 11150

 13220

 Bucket for microtiter plates, max. height of plates 54 mm, 1 set = 2 pcs.

 11150

 13221

 Bucket for microtiter plates, incl. plate holder no. 17979, max. height of plates 56 mm, 1 set = 2 pcs.

 11150

 13233

 Multiple carrier for 50 x tubes approx. 5 ml, max. Ø 12.5 x 70 – 90 mm, 1 set = 2pcs.

 11121, 11123

 13234

 Multiple carrier for 4 x 100 ml for tubes max. Ø 45 x 92 – 100 mm, incl. rubber cushion no. 16051, 1 set = 2 pcs.

 11150

 13235

 Multiple carrier for 7 culture tubes 50 ml no. 15151, 1 set = 2 pcs.

 11150

 13236

 Multiple carrier for 12 culture tubes 15 ml no. 15115, 1 set = 2 pcs.

 11150

 13350

 Round bucket, for round carriers Ø 85 mm and 500 ml bottles, max. tube length 130m, 1 set = 2 pcs.

 11150

 13127

 Rectangular bucket, for the system of rectangular carriers, max. tube length 115 mm, 1 set = 2 pcs.

 11156

 13218

 Bucket for microtiter plates, incl. plate holder no. 17978, max. height of plates approx. 80 mm, 1 set = 2 pcs.

 11118

 13021

 Adapter for PCR-tube 0.2 ml, e.g no. 15042, 1 set = 2 pcs.

 12124

 13000

 Adapter for reaction vials 0.25/0.4 ml no. 15014, 1 set = 2 pcs.

 12124

 13002

 Adapter for reaction vials 0.5/0.75 ml, Ø 7.9/10 x 28/31 mm, e.g. no. 15005, 1 set = 2 pcs.

 12124

 17112

 Rectangular polysulfone sealing cap, clear, incl. 1 set clips no. 17118, 1 set = 2pcs.

 13127, 13180

 17134

 Round aluminium sealing cap, 1 set = 2 pcs.

 13034, 13550

 17350

 Round carrier for 24 reaction vials 0.5/0.75 ml, max. Ø 8/10 x 28/31 mm, 1 set = 2 pcs.

 13190, 13350

 17356

 Round carrier for 16 round bottom tubes 5 – 6 ml, max. Ø 13.5/17.5 x 70 – 90 mm, 1 set = 2 pcs.

 13190, 13350

 17360

 Round carrier for 10 culture tubes 15 ml, max. cap Ø 22 mm, 1 set = 2 pcs.

 13350, 13550

 17385

 Round carrier for 1 tube 78 – 85 ml, max. Ø 38/40 x 85 – 115 mm, 1 set = 2 pcs.

 13190, 13350

17390

 Round carrier incl. rubber cushion no. 16051,

for 1 round bottom tube 100 ml,max. Ø 45/50 x 85 – 110 mm, 1 set = 2 pcs.

 13190, 13350

 17401

 Round carrier incl. rubber cushion no. 16250 for 1 round bottom tube 175 – 250 ml,

max. Ø 57.5 x 90 – 150 mm, 1 set = 2 pcs.

11150

 17347

 Round carrier for 1 bottle with flat bottom, 250 ml, max. Ø 61.5 x 90 – 125 mm, 1 set = 2 pcs.

 13190, 13350

 15500

 Polycarbonate bottle 500 ml, Ø 85 x 135 mm, incl. screw cap

 13350, 13550

 18002

 Rectangular carrier for 20 reaction vials 1.5/2.2 ml, max. Ø 11 mm, 1 set = 2 pcs.

 13127, 13180

 18010

 Rectangular carrier for 12 tubes 10 – 12 ml, flat and round bottom, max. Ø 16.8/17.5 x 60 – 85 mm, 1 set = 2 pcs.

 13127, 13215

 18030

 Rectangular carrier for 5 round bottom tubes 27 – 30 ml, max. Ø 25.4/27.5 x 80 – 110 mm, 1 set = 2 pcs.

 13127, 13180

 18050

 Rectangular carrier for 2 round bottom tubes approx. 50 ml, max. Ø 35/38 x 85 – 110 mm, 1 set = 2 pcs.

 13127, 13215

 18250

 Rectangular carrier for 1 tube 175 – 250 ml

incl. rubber cushion no. 16051, max. Ø 57 x 90 – 137 mm, 1 set = 2 pcs.

 13127, 13215

 17108

 Polysulfone sealing cap, clear, incl. 2 sets clips no. 17118, 1 set = 2 pcs.

 13218, 13845

17118

 Clip for sealing caps, 1 set = 2 pcs.

 17108, 17112

17978

 Plate holder for bucket no. 13218, 1 set = 2 pcs.

 13218

 

Spin Control

 

Spincontrol Comfort

 Spincontrol Professional

 Display

 Grafik LCD

 TFT

 Plain text pop up window

 +

 +

 Permanent display preselected, current values

 +

 +

 Languages

 D, GB

 D, GB

 Timer

 10sec – 9h 59min

 10sec – 9h 59min

 Timer after set speed has been reached

 -

 +

 Time increments [sec]

 60; 1

 60; 1

 Short run

 +

 +

 Continous run

 +

 +

 Speed increments [rpm]

 100; 1

 10; 1

 Display speed and g-force

 +

 +

 G-force increments [xg]

 10; 1

 10; 1

 Temperature increments [°C]

 1

 1

 Switchable °C, °F

 -

 +

 Standstill cooling, switchable

 +, +

 +, +

 Standstill heating, switchable

 +, +

 +, +

 Rapid cooling program: Rapid_cool

 +

 +

 Start refused with exceeded temperature tolerance, tolerance preselectable

 -

 +

 Programs

 50

60

 User defined program name

 -

 +

 Program list shows all parameters

 +, +

 +, -

 Linear acceleration curves

 10

 10

 Quadratic deceleration curves

 10

 10

 User defined acceleration curves

 10

 10

 Linear deceleration curves

 10

 10

 Quadratic deceleration curves

 10

 10

 User defined deceleration curves

 10

 10

 Brakeless

 +

 +

 Combination deceleration a. brakeless from 1000 – 150 rpm selectable

 -

 +

 Auto lid open, switchable

 +

 +

 Accoustic signal, switchable

 +, +

 +, +

 Signal length preselectable

 +

 +

 Optical display stillstand

 +

 +

 Counting cycles centrifuge, each rotor

 +, +

 +, +

 Pop up window end of rotor life time

 +

 +

 Automatic lid opening at the end of the run, switchable

 +, +

 +, +

 All rotors are programmed: speed, g-force, radius

 +

 +

 Max. radius decreasealbe

 +

 +

 Calculation for liquid density >1.2g/cm3

 +

 +

 Start delay

 +

 +

 Controlunit lockable

 +

 +

 Code protection

 +

 +

Write Your Own Review
You're reviewing:Sigma 4-16S Centrifuge
BUYING OPTIONS

Please swipe right and left to horizontal scroll the buying options.

Product Code Description List Price Offer Price
10380 Sigma 4-16S, laboratory table top centrifuge, 220-240 V, 50/60 Hz
£8,895.00
£6,087.00
ADD
17108 Polysulfone sealing cap
£244.00
£156.00
ADD
Accessories

Please swipe right and left to horizontal scroll the buying options.

Swing-Out Rotors & Buckets
Product Code Description List Price Offer Price
11118 Swing-out rotor for microtiter plates, Biosafe certificate, incl. 1 set carriers no. 13218, with 1 set caps no. 17108, incl. plate holder no. 17978, max. height of plates 80 mm, max. load per bucket approx. 520 grams
£4,835.00
£3,086.00
ADD
11150 Swing-out rotor, 4 place, for buckets no. 13215, 13220, 13221, 13233, 13234, 13235, 13236, 13350, (13420, 13550 with 6-16S, 6-16KS only)
£1,748.00
£1,118.00
ADD
11650 Swing-out rotor, 4 place, for buckets 13421, 13450, (13621, 13625, 13635, 13650 only in 6-16S, 6-16KS)
£2,583.00
£1,650.00
ADD
11660 Swing-out rotor, stainless steel, 4 place, for buckets 13421, 13450, (13460 only in 4-5L), (13621, 13625, 13635, 13650 only in 6-16S, 6-16KS)
£2,680.00
£1,711.00
ADD
13215 Rectangular bucket, sealable with cap
£756.00
£484.00
ADD
13421 Bucket for microtiter plates, max. height of plates 60 mm, incl. plate holder no. 17979, 1 set = 4 pcs.
£3,390.00
£2,165.00
ADD
13450 Round bucket, Biosafe certificate, sealable with cap no. 17170, for round adapters Ø 100 mm, (no. 17649 - 17699), for 750 ml bottle no. 15917 , adapter no. 13654, max. tube length 140 mm, 1 set = 2 pcs.
£1,347.00
£863.00
ADD
13460 Rectangular bucket, Biosafe certificate, incl. 1 set caps 17460, for rectangular adapter no. 18460, 18461, 4-5L only, 1 set = 2 pcs.
£1,591.00
£1,017.00
ADD
Adapters for Bucket 13450
Product Code Description List Price Offer Price
13654 1 x 500 ml, Ø 85 x 130 – 173 mm, e.g. no. 15500, 15501
£343.00
£220.00
ENQUIRE
17652 Round carrier for 36 round bottom tubes 5 ml, max. ÕÉ 12.5 x 60 - 80 mm, e.g. no. RIA tubes 15060, hemolyse tubes, 1 set = 2 pcs
£373.00
£239.00
ADD
17653 Round carrier for 26 reaction vials 1.5/2.0 ml, max. Ø 11 mm, e.g. no. 15008, 15040, 1 set = 2 pcs
£373.00
£239.00
ADD
17654 Round carrier for 32 round bottom tubes approx. 7 ml, max. Ø 12.5 x 85 - 115 mm, e.g. no. 15007, 15027, 1 set = 2 pcs.
£373.00
£239.00
ADD
17655 Round carrier for 20 round bottom tubes 10 - 12 ml, max. Ø 16.2/18 x 65 - 90 mm, e.g. no. 15000, 15010, 15039, 1 set = 2 pcs
£373.00
£239.00
ADD
17656 Round carrier for 22 round bottom tubes 5 - 6 ml, max. Ø 13.5/17.5 x 70 - 90 mm, e.g. no. RIA tubes no. 15060, Vacutainer, hemolyse tubes, 1 set = 2 pcs
£373.00
£239.00
ADD
17658 Round carrier for 19 round bottom tubes 9 - 15 ml, max. ÕÉ 17.2/19.5 x 85 - 115 mm, e.g. no. 15015, 15020, 15022, 15023, 15024 and Monovettes 9 - 10 ml, 1 set = 2 pcs
£373.00
£239.00
ADD
17659 Round carrier for 12 culture tubes 15 ml no. 15115 with caps Ø max. 23 mm, 1 set = 2 pcs.
£373.00
£239.00
ADD
17660 Round adapter for 15 x 15 ml conical culture tubes, *only without cap no. 17170, 1 set = 2 pcs.
£373.00
£239.00
ADD
17662 Round carrier for 7 tubes 30 ml, flat bottom or skirt, max. Ø 25/31 x 65 - 95 mm, e.g. Sterilin 128A, 128B, 128C, 128BBAC, Sarstedt 62.543, 62.543.001, 62.543.027, 62.543.030, 1 set = 2 pcs
£373.00
£239.00
ADD
17670 Round carrier for 8 round bottom tubes 25 - 30 ml, max. ÕÉ 25.4/30 x 90 - 115 mm, e.g. no. 15025, 15026, 15029, 15030, 15032, 15033, 1 set = 2 pcs
£373.00
£239.00
ADD
17675 Round carrier for 4 round bottom tubes 50 ml, max. Ø 35/38 x 90 - 115 mm, e.g. 15045, 15049, 15056, 15050, 1 set = 2 pcs
£373.00
£239.00
ADD
17676 Round carrier for 7 round bottom tubes 40 - 50 ml with screw cap, max. Ø 29/32 x 90 - 115 mm, e.g. 13055, 15051, 15052, 1 set = 2 pcs.
£373.00
£239.00
ADD
17677 Round carrier for 5 culture tubes 50 ml, e.g. no. 15151, Nunc, Corning, Falcon and Greiner, 1 set = 2 pcs
£373.00
£239.00
ADD
17678 Round carrier for 5 culture tubes 50 ml with skirt or flat bottom, max. Ø 29.4/36 x 90 - 120 mm, 1 set = 2 pcs.
£373.00
£239.00
ADD
17679 Round carrier for 7 culture tubes 50 ml, e.g. no. 15151, 1 set = 2 pcs.
£373.00
£239.00
ADD
17682 Round carrier for 1 bottle 500 ml conical, Corning no. 431123, angle 75ë, ÕÉ 96 x 150 mm, 1 set = 2 pcs
£373.00
£239.00
ADD
17685 Round carrier for 3 tubes 78 - 85 ml, max. ÕÉ 38/40 x 90 - 110 mm, e.g. no. 13085, 15076, 15080, 1 set = 2 pcs
£373.00
£239.00
ADD
17690 Round carrier incl. rubber cushion no. 16051, for 2 round bottom tubes approx. 100 ml, max. ÕÉ 45/47 x 85 - 110 mm, e.g. no. 15078, 15100, 15103, 15106, 1 set = 2 pcs
£373.00
£239.00
ADD
17692 Round carrier for 1 bottle with flat bottom approx. 125 ml, max. Ø 51 x 90 - 115 mm, e.g. no. 15125, 1 set = 2 pcs.
£373.00
£239.00
ADD
17693 Round carrier for 1 bottle approx. 200 - 250 ml, conical, angle 60°, max. Ø 61.5 x 140 - 164 mm e.g. no. Nalgene 200 ml no. 3143-0175, Nunc 200 ml no. 376813, Corning 250 ml no. 430776 not for 13450, Termo-Nunc 250 ml, no. 376814, 1 set = 2 pcs
£373.00
£239.00
ADD
17694 Round carrier for 1 bottle 150 - 250 ml conical, angle 88ë, max. ÕÉ 61 x 120 - 140 mm, e.g. Falcon 175 ml no. 352076, Falcon 225 ml no. 352075, Labcon 175 ml no. 3080-820-000, VWR 175 ml no. 89218-280, -282, Labcon 250 ml no. 3081-820-000, VWR 250 ml no
£373.00
£239.00
ADD
17696 Round carrier for 1 bottle with flat bottom approx. 200 ml, max. ÕÉ 57 x 90 - 115 mm, e.g. no. 15202, 1 set = 2 pcs
£373.00
£239.00
ADD
17698 Round carrier for 1 bottle with flat bottom 250 ml, max. ÕÉ 61.5 x 90 - 125 mm, e.g. no. 13255, 15247, 15249, 1 set = 2 pcs
£373.00
£239.00
ADD
Adapters for Bucket 13460
Product Code Description List Price Offer Price
18460 Rectangular adapter for 25 tubes, max. Ø 17.2/19.5 x 85 - 115 mm, 1 set = 2 pcs
£445.00
£287.00
ADD
18461 Rectangular adapter for 35 tubes, max. Ø 13.5/17.5 x 70 - 106 mm, 1 set = 2 pcs.
£445.00
£287.00
ADD
Adapters for Bucket 13350
Product Code Description List Price Offer Price
17350 Round carrier for 24 reaction vials 0.5/0.75 ml, max. Ø 8/10 x 28/31 mm, e.g. no. 15005, 1 set = 2 pcs.
£263.00
£169.00
ADD
17352 Round carrier for 25 round bottom tubes 5 ml, max. ÕÉ 12.5/13.5 x 65 - 80 mm, e.g. no. 15060, RIA - tubes, hemolyse tubes, 1 set = 2 pcs.
£263.00
£169.00
ADD
17353 Round carrier for 20 reaction vials 1.5/2.0 ml, max. Ø 11 mm, e.g. no. 15008, 15040, 1 set = 2 pcs.
£263.00
£169.00
ADD
17354 Round carrier for 16 round bottom tubes 7 ml, max. Ø 12.5 x 85 - 115 mm, e.g. no. 15007, 15027, 1 set = 2 pcs.
£263.00
£169.00
ADD
17355 Round carrier for 12 round bottom tubes 10 - 12 ml, max. Ø 16.3/19 x 65 - 90 mm, e.g. no. 15000, 15010, 15039, 1 set = 2 pcs.
£263.00
£169.00
ADD
17356 Round carrier for 16 round bottom tubes 5 - 6 ml, max. Ø 13.5/17.5 x 70 - 90 mm, e.g. no. RIA tube 15060, Vacutainer, hemolyse tubes, 1 set = 2 pcs.
£263.00
£169.00
ADD
17358 Round carrier for 12 round bottom tubes 10 - 15 ml, max. Ø 17.2/19.5 x 90 - 115 mm, e.g. no. 15015, 15020, 15022, 15023, 15024 and Monovettes 9 - 10 ml, 1 set = 2 pcs.
£263.00
£169.00
ADD
17359 Adapter 9 x 15ml conical tubes (w/o bucket cap) 1 set = 2 pcs.
£263.00
£169.00
ADD
17360 Round carrier for 10 culture tubes 15 ml, max. cap Ø 22 mm, 1 set = 2 pcs.
£265.00
£170.00
ADD
17361 Adapter 16 x microtainers, max. 10.8/15.5 x 46,5 mm 1 set = 2 pcs.
£263.00
£169.00
ADD
17362 Round carrier for 5 tubes 30 ml, flat bottom or skirt, max. ÕÉ 25/31 x 65 - 95 mm, e.g. Sterilin 128A, 128B, 128C, 128BBAC, Sarstedt 62.543, 62.543.001, 62.543.027, 62.543.030, 1 set = 2 pcs.
£263.00
£169.00
ADD
17370 Round carrier for 5 round bottom tubes 25 - 30 ml, max. Ø 25.4/29 x 85 - 115 mm, e.g. no. 15025, 15026, 15029, 15030, 15032, 15033, 1 set = 2 pcs.
£263.00
£169.00
ADD
17375 Round carrier for 3 round bottom tubes 50 ml, max. Ø 35/38 x 90 - 110 mm, e.g. no. 15045, 15049, 15050, 15056, 1 set = 2 pcs.
£263.00
£169.00
ADD
17376 Round carrier for 4 round bottom tubes with screw cap 40 - 50 ml, max. Ø 29/34 x 85 - 110 mm, e.g. no. 15051, 15052, (13055 with 13350/13550 only), 1 set = 2 pcs.
£263.00
£169.00
ADD
17377 Adapter 4 x 50 ml conical tubes (w/o bucket cap) 1 set = 2 pcs.
£263.00
£169.00
ADD
17378 Round carrier for 4 culture tubes 50 ml with skirt or flat bottom, max. Ø 29.4/36 x 90 - 120 mm, 1 set = 2 pcs
£265.00
£170.00
ADD
17385 Round carrier for 1 tube 78 - 85 ml, max. Ø 38/40 x 85 - 115 mm, e.g. no. 13085, 15076, 15080, 1 set = 2 pcs.
£263.00
£169.00
ADD
17390 Round carrier incl. rubber cushion no. 16051, for 1 round bottom tube 100 ml, max. Ø 45/50 x 85 - 110 mm, e.g. no. 15078, 15100, 15103, 15106, 1 set = 2 pcs.
£263.00
£169.00
ADD
17393 Round carrier for 1 bottle 175 - 250 ml conical, angle 60°, max. Ø 61.5 x 120 - 165 mm, e.g. no. Nunc 200 ml no. 376813, Nalgene 200 ml no. 3143-0175, Corning 250 ml no. 430776, 1 set = 2 pcs.
£263.00
£169.00
ADD
17395 Round carrier for 1 bottle with flat bottom 125 ml, max. Ø 51 x 90 - 115 mm, e.g. no. 15125, 1 set = 2 pcs.
£263.00
£169.00
ADD
17400 Round carrier for 1 bottle with flat bottom 200 ml, max. Ø 57 x 90 - 115 mm, e.g. no. 15202, 1 set = 2 pcs.
£263.00
£169.00
ADD
17401 Round carrier incl. rubber cushion no. 16250 for 1 round bottom tube 175 - 250 ml, max. Ø 57.5 x 90 - 137 mm with 13350 and 150 mm with 13550, e.g. no. 15201, 15206, 15250, 15254, 1 set = 2 pcs.
£404.00
£259.00
ADD
17402 Adapter 1 x 150 - 250 ml conical, angle 88° max. Ø 61 x 120 - 140 mm (w/o bucket cap)
£402.00
£260.00
ADD
Adapters for Bucket 13215
Product Code Description List Price Offer Price
18002 Rectangular bucket, for rectangular carriers no. 18002 - 18200, sealable with cap no. 17112, max. tube length 115 mm, 1 set = 2 pcs.
£221.00
£142.00
ADD
18005 Rectangular carrier for 20 tubes approx. 5 ml, flat and round bottom, max. Ø 12.5 x 60 - 75 mm, e.g. RIA tube no. 15060, 1 set = 2 pcs.
£161.00
£104.00
ADD
18006 Rectangular carrier for 6 Eppendorf reaction caps 5 ml, 1 set = 2 pcs
£221.00
£142.00
ADD
18007 Rectangular carrier for 20 tubes approx. 7 ml, flat and round bottom, max. Ø 12.3 x 80 - 105 mm, e.g. no. 15007, 15027, 1 set = 2 pcs.
£161.00
£104.00
ADD
18010 Rectangular carrier for 12 tubes 10 - 12 ml, flat and round bottom, max. Ø 16.8/17.5 x 60 - 85 mm, e.g. no. 15000, 15010, 15039, 1 set = 2 pcs.
£161.00
£104.00
ADD
18012 Rectangular carrier for 12 tubes 6 - 7 ml, max. Ø 13.5/18 x 65 - 90 mm, e.g Vacutainer, 1 set = 2 pcs.
£221.00
£142.00
ADD
18015 Rectangular carrier for 12 tubes 10 - 15 ml, flat and round bottom, max. Ø 17 x 90 - 105 mm, e.g. no. 15015, 15020, 15022, 15023, 15024, 1 set = 2 pcs.
£161.00
£104.00
ADD
18016 Rectangular carrier for 4 culture tubes 15 ml no. 15115 1 set = 2 pcs.
£221.00
£142.00
ADD
18017 Rectangular carrier for 10 tubes 15 ml and tubes with plug, max. Ø 17,2/18 x 80 - 112 mm, e.g. Monovettes 9 and 10 ml
£221.00
£142.00
ADD
18018 Rectangular carrier for 6 culture tubes 15 ml e.g. no. 15115, 1 set = 2 pcs
£221.00
£142.00
ADD
18022 Rectangular carrier for 4 tubes 30 ml, flat bottom or skirt, max. Ø 25/31 x 65 - 95 mm, e.g. Sterilin 128A, 128B, 128C, 128BBAC, Sarstedt 62.543, 62.543.001, 62.543.027, 62.543.030, 1 set = 2 pcs
£221.00
£142.00
ADD
18025 Rectangular carrier for 5 round bottom tubes approx. 25 ml, max. Ø 24 x 85 - 105 mm, e.g. no. 15025, 15026, 15033, 1 set = 2 pcs
£161.00
£104.00
ADD
18030 Rectangular carrier for 5 round bottom tubes 27 - 30 ml, max. ÕÉ 25.4/27.5 x 80 - 110 mm, e.g. no. 15029, 15030, 15032, 1 set = 2 pcs
£221.00
£142.00
ADD
18050 Rectangular carrier for 2 round bottom tubes approx. 50 ml, max. Ø 35/38 x 85 - 110 mm, e.g. no. 15045, 15049, 15050, 15056, 1 set = 2 pcs
£161.00
£104.00
ADD
18051 Rectangular carrier for 2 round bottom tubes 40 - 50 ml, max. Ø 29/35 x 80 - 110 mm, e.g. no. 13055, 15051, 15052, 1 set = 2 pcs.
£161.00
£104.00
ADD
18052 Rectangular carrier for 2 culture tubes 50 ml e.g. no. 15151 1 set = 2 pcs
£221.00
£142.00
ADD
18053 Rectangular carrier for 2 culture tube 50 ml with skirt or flat bottom, max. Ø 29.4/36 x 90 - 120 mm, 1 set = 2 pcs.
£221.00
£142.00
ADD
18085 Rectangular carrier for 1 round bottom tube 78 - 85 ml, max. ÕÉ 38/40 x 85 - 112 mm, e.g. no. 13085, 15076, 15080, 1 set = 2 pcs
£221.00
£142.00
ADD
18100 Rectangular carrier for 1 round bottom tube approx. 100 ml, max. Ø 45.5/48 x 85 - 110 mm, e.g. no. 15078, 15100, 15103, 15106, 1 set = 2 pcs
£161.00
£104.00
ADD
18125 Rectangular carrier for 1 bottle 125 ml with flat bottom and screw cap, max. Ø 51 x 90 - 120 mm, e.g. no. 15125, 1 set = 2 pcs.
£221.00
£142.00
ADD
18200 Rectangular carrier for 1 bottle with flat bottom and screw cap 200 ml, max. Ø 57 x 90 - 115 mm, e.g. no. 15202, 1 set = 2 pcs
£221.00
£142.00
ADD
18250 Rectangular carrier for 1 tube 175 - 250 ml incl. rubber cushion no. 16051, max. Ø 57 x 90 - 137 mm, e.g. no. 15201, 15206, 15250, 15254 (In 13127, 13215 not possible: 15250, 15254), 1 set = 2 pcs
£221.00
£142.00
ADD
Fixed Angle Rotors
Product Code Description List Price Offer Price
12168 Angle rotor 20 x 10 ml, for tubes e.g. no. 15000, 15010, 15039, incl. hermetic aluminium lid no. 17846
£3,103.00
£1,982.00
ADD
12170 Angle rotor for 12 x 15 ml culture tubes e.g. no. 15115, incl. hermetic aluminium lid no. 17859
£3,275.00
£2,091.00
ADD
12172 Angle rotor 12 x 30 ml, for tubes e.g. no. 15029, 15030, 15032, incl. hermetic aluminium lid no. 17845
£2,827.00
£1,805.00
ADD
12174 Angle rotor for 24 x 15 ml culture tubes e.g. no. 15115, incl. hermetic aluminium lid no. 17883
£3,763.00
£2,351.00
ADD
12201 Angle rotor 100 x 1.5/2.0 ml, for e.g. reaction vials e.g. no. 15008, 15040 (2 lines, angle 45°), incl. hermetic aluminium lid no. 17896
£5,144.00
£3,285.00
ADD
12265 Angle rotor 6 x 85 ml, Biosafe certificate, for tubes no. 13085, 15076, 15080, incl. bayonet lid no. 17607
£2,699.00
£1,724.00
ADD
12266 Angle rotor 8 x 50 ml, Biosafe certificate, for tubes no. 13055, 15051, 15052, incl. bayonet lid no. 17605
£2,429.00
£1,553.00
ADD
12269 Angle rotor for 8 x 50 ml, Biosafe certificate, culture tubes e.g. no. 15151, incl. bayonet lid no. 17604
£3,168.00
£2,024.00
ADD
12356 Angle rotor 6 x 250 ml, Biosafe certificate, for bottles no. 13255, 15247, 15249 and adapters 14122 - 14134, incl. bayonet lid no. 17603
£5,688.00
£3,633.00
ADD
12449 Angle rotor 48 x 1.5/2.0 ml, Biosafe certificate, for reaction vials no. e.g. 15008, 15040, incl. bayonet lid no. 17612
£2,633.00
£1,682.00
ADD
12450 Angle rotor 24 x 5 ml, Eppendorf reaction caps, Biosafe certificate, incl. bayonet lid no. 17614
£2,633.00
£1,682.00
ADD
Adapters for Fixed Angle Rotors
Product Code Description List Price Offer Price
13000 Adapter for reaction vials 0.25/0.4 ml no. 15014 1 set = 2 pcs
£12.00
£7.00
ADD
13002 Adapter for reaction vials 0.5/0.75 ml, Ø 7.9/10 x 28/31 mm, e.g. no. 15005 1 set = 2 pcs
£12.00
£7.00
ADD
13021 Adapter for PCR-tube 0.2 ml, e.g no. 15042, 1 set = 2 pcs
£12.00
£7.00
ADD
13059 Adapter for 1 round bottom tube 10 ml, max. ÕÉ 16.2/19 x 75 - 85 mm, e.g. no. 15000, 15010, 15039, 1 set = 2 pcs.
£174.00
£112.00
ADD
13060 Adapter for 1 culture tube 15 ml no. 15115 1 set = 2 pcs
£77.00
£49.00
ADD
13062 Adapter for 1 Greiner tube 15 ml, ÕÉ 17/22 x 95 - 100 mm, 1 set = 2 pcs.
£111.00
£70.00
ADD
13079 Bottomadapter for 1 tube 50 ml, e.g. no. 15051, 15052, 1 set = 2 pcs
£93.00
£59.00
ADD
13080 Adapter for 1 culture tube 50 ml, e.g. no. 15151, 1 set = 2 pcs.
£161.00
£104.00
ADD
13082 Adapter for 1 tube 50 ml, max. ÕÉ 28.8 x 105 - 115 mm, e.g. no. 13055, 15051, 15052, 1 set = 2 pcs.
£161.00
£104.00
ADD
13083 Adapter for 1 tube 30 ml, max. ÕÉ 25.5 x 90 - 100 mm, e.g. no. 15029, 15030, 15032, 1 set = 2 pcs.
£161.00
£104.00
ADD
13084 Adapter, for 2 tubes 10 ml, ÕÉ 16/17.5 x 75 - 90 mm, e.g. no. 15000, 15010, 15039, 1 set = 2 pcs.
£161.00
£104.00
ADD
14122 Adapter for 9 reaction vials 1.5/2.0 ml, max. ÕÉ 11 mm, e.g. no. 15008, 15040, 1 set = 2 pcs
£272.00
£174.00
ADD
14124 Adaptor for rotor 12258 - 6 x 10 ml
£272.00
£174.00
ADD
14125 Adapter for 4 culture tubes 15 ml, cap max. Ø 23 mm, e.g. no. 15115 Nunc, Falcon, Greiner, Corning tubes, 1 set = 2 pcs
£272.00
£174.00
ADD
14127 Adaptor for rotor 12258 - 2 x 30 ml
£272.00
£174.00
ADD
14129 Adaptor for rotor 12258 - 1 x 50 ml
£272.00
£174.00
ADD
14131 Adaptor for rotor 12258 - 1 x 50 ml Culture
£272.00
£174.00
ADD
14134 Adaptor for rotor 12258 - 1 x 85 ml
£271.00
£174.00
ADD
16018 Rubber adapter for glass tubes 15 ml no. 15015, 15022 and 15085, 1 set = 2 pcs.
£129.00
£82.00
ADD
16019 Rubber adapter for glass tubes no. 15015, 15022 and 15085, 1 set = 2 pcs.
£133.00
£84.00
ADD
16030 Rubber adapter for glass tube no. 15025, 15033 and 15086, 1 set = 2 pcs.
£80.00
£51.00
ADD
Get in touch with us on 01939 234222

Need further assistance or can't find what you're looking for? Please complete all details of your enquiry and we will get back to you shortly.

  • I would like to receive updates about products & services, promotions,special offers, news & events from SciQuip Ltd.

Certified to ISO9001 & ISO14001

MORE

more cta
SciQuip Supports
more cta
Microscopes
From £150
more cta
TITAN Pipette Filler
Special Offer £115
more cta
SciQuip Vortex Mixers
From £84

If you're unable to find the scientific or medical laboratory equipment supplies you're looking for, please do not hesitate to contact SciQuip Technical Sales Support on 01939 234222 or by email at info@sciquip.co.uk