ISO9001:2015 & ISO14001:2015
Sigma 6-16KS Refrigerated Centrifuge
Product Details
- Universal table top centrifuge; speed range up to 13.500rpm
- Control unit Spincontrol Comfort or Professional
- Various angle and swing-out rotors available
- Lid can easily be opened due pneumatic swing support
- Maximum capacity of 4 x 800 ml down to microtubes with different adapters in the same bucket
- Maintenance-free induction drive motor;
- A Microcontroller controls speed, time, temperature and gravitational field
- Motorized lid lock
- Suitable for low speeds e.g. for cell sedimentation, accuracy +/- 1 rpm
- Magnetic rotor identification prevents the rotor from overspeeding
- Stainless steel bowl
- Imbalance switch
- No need to open the casing for emergency lid lock release
- Produced according to national and international safety regulations (e.g. IEC 1010).
As the officially appointed Sigma centrifuge sales and service specialist within the uk, we have vast experience in the specification, application and installation of their full range of centrifuges and if the model you require is not listed please feel free to call us on 01939 234 222 or contact us below.
Technical Specifications
Technical Data |
6-16KS |
Power supply |
220-240 V, 50/0 Hz |
Power consumption [W] |
2,000 |
Max. capacity [ml] |
4 x 800 |
Max. speed [rpm] |
15,000 |
Min. speed [rpm] |
100 |
Interference suppression |
EN 61326 |
Height x Width x Depth [mm] |
485 x 790 x 711 |
Height with open lid [mm] |
990 |
Weight without rotor [kg] |
158 |
Kinetic energy max. [Nm] |
154,007 |
Noise level at max. speed (approx.) |
63 dB (A) |
Max. acceleration - Rotor 12600 [sec] |
52 168 |
Temperature adjustment range |
-20 – +40 |
Spin Control
Spincontrol Comfort |
Spincontrol Professional |
|
Display |
Grafik LCD |
TFT |
Plain text pop up window |
+ |
+ |
Permanent display preselected, current values |
+ |
+ |
Languages |
D, GB |
D, GB |
Timer |
10sec – 9h 59min |
10sec – 9h 59min |
Timer after set speed has been reached |
- |
+ |
Time increments [sec] |
60; 1 |
60; 1 |
Short run |
+ |
+ |
Continous run |
+ |
+ |
Speed increments [rpm] |
100; 1 |
10; 1 |
Display speed and g-force |
+ |
+ |
G-force increments [xg] |
10; 1 |
10; 1 |
Temperature increments [°C] |
1 |
1 |
Switchable °C, °F |
- |
+ |
Standstill cooling, switchable |
+, + |
+, + |
Standstill heating, switchable |
+, + |
+, + |
Rapid cooling program: Rapid_cool |
+, + |
+, + |
Start refused with exceeded temperature tolerance, tolerancepreselectable |
- |
+ |
Programs |
50 |
60 |
User defined program name |
- |
+ |
Program list shows all parameters |
+, + |
+, - |
Linear acceleration curves |
10 |
10 |
Quadratic deceleration curves |
10 |
10 |
User defined acceleration curves |
10 |
10 |
Linear deceleration curves |
10 |
10 |
Quadratic deceleration curves |
10 |
10 |
User defined deceleration curves |
10 |
10 |
Brakeless |
+ |
+ |
Combination deceleration a. brakeless from 1000 – 150 rpm selectable |
- |
+ |
Auto lid open, switchable |
+ |
+ |
Accoustic signal, switchable |
+, + |
+, + |
Signal length preselectable |
+ |
+ |
Optical display stillstand |
+ |
+ |
Counting cycles centrifuge, each rotor |
+, + |
+, + |
Pop up window end of rotor life time |
+ |
+ |
Automatic lid opening at the end of the run, switchable |
+, + |
+, + |
All rotors are programmed: speed, g-force, radius |
+ |
+ |
Max. radius decreasealbe |
+ |
+ |
Calculation for liquid density >1.2g/cm3 |
+ |
+ |
Start delay |
+ |
+ |
Controlunit lockable |
+ |
+ |
Code protection |
+ |
+ |
As the officially appointed Sigma centrifuge sales and service specialist within the uk, we have vast experience in the specification, application and installation of their full range of centrifuges and if the model you require is not listed please feel free to contact us on 01939 234 222 or below.
Brochures
Write a review of Sigma 6-16KS Refrigerated Centrifuge
Get in touch with us on 01939 234222
Need further assistance or can't find what you're looking for? Please complete all details of your enquiry and we will get back to you shortly.